FAQ's

Yes, we'd love to hear from you.  Any questions regarding any of our products, please  contact us on 01924 635155 or email us on sales@3dstoragesystems.co.uk.

Yes, please contact us on 01924 635155 or email us at sales@3dstoragesystems.co.uk if you can’t find the exact product or dimensions you are looking for.

We can offer numerous locking options at additional cost depending on products. Please contact us for pricing on 01924 635155

•  Coin Return Lock (£1 or Token)
•  Coin Retain Lock (£1 or Token)
•  Multi-User combination lock.  Front face dial with 10,000 combinations
•  Pre-Set Combination dial lock.  Comes with 5 pre-set factory combinations.
•  Digital Combination Lock. Powered by battery. 40,000 combinations.
•  Magnetic Catch Lock.  Ideal where security is not an issue.
• Radial Pin lock
• Security Hasp
• Finger Hole
• RFID

Yes,we can join lockers together side by side in manufacturing.  The lockers will have common sides  and cannot be separated at a later date

Lockers can be nested up to 3 long (Nest 3) depending on size of initial unit.  Please contact us for pricing on 01924 635155 or email sales@3dstoragesystems.co.uk

When you select the product size, a quantity box will automatically appear.  If you have any problems, please contact us on 01924 635155 and we'll talk you through it.

Yes, non standard colours are available at additional cost subject to a minimum order/ door quantity.  Please contact us on 01924 635155 for further information.

You can use any manufacture of padlock but make sure that the shackle diameter is a minimum 6mm and maximum 7.5mm.  Also the top dimension (i.e. the height of the shackle should be between 19mm and 25mm.  Further information from our team at 3d Storage Systems on 01924 635155

All dimensions are overall dimensions unless otherwise specified.  All dimension are in mm.  For example if the locker is 300mm wide this is the overall dimension.

All internal dimensions are detailed in the 'dimensions' tab at the bottom of the product page.  

If you are unsure or require more information, please call our sales team on 01924 635155

1m = 39.37inch

1 foot = 30.5cm

1 inch = 2.54cm

300mm is 12"

380mm is 15"

450mm is 18"

The delivery note which comes with your product will indicate where the locker keys are situated.Keys can be in a number of different places, depending on supplier:

1:  Locker keys are usually placed in the top left compartment of the locker.  Sometimes the locker compartment is open and the rest of the keys are in a plastic bag inside the compartment.  

2:  The initial locker key for the top left compartment is placed underneath the base of the locker.  This locker key will give access to the top left compartment.  Please do not install lockers until all the keys are located.  For further information, please call our sales team on 01924 635155

Masterkeys can be found in any of the following ways:

1:  Attached to delivery note

2:  Given to you by the driver

3:  Posted directly to customer.

If the masterkey is not in any of the above locations, then please contact us on 01924 635155 or email sales@3dstoragesystems.co.uk