Shockbox 2 Door Laminate Door Locker

Shockbox 2 Door Laminate Door Locker offer a long lasting storage solution. Featuring 10mm solid grade laminate doors that are impact and scratch resistant. Ideal for high usage gym or school environments where the lockers would take a lot of hockey. Laminate lockers are very easy to clean and maintain with a wipeclean surface. The steel body also comes with an anti-bacterial coating.

Our ShockBox lockers come with a camlock or hasp & staple lock as standard. 4 digit scroll combination locks and digital combination locks are available at an extra cost. Sloping tops, end panels and number plates can also be added.

Choose from a range of vibrant stock door colours on our website. A selection of non stock door colours are available subject to minimum quantity. (Please call us for details).

Nesting bolts to suit proble lockers, please note 4 nesting bolts per side required. Nesting Bolts are supplied as packs of 25, please calculate how many nesting bolts required and order accordingly.

Laminate lockers are supplied with holes in the sides and the back making them very easy to fit and install.

Overlay laminate doors
10mm solid grade Arpa laminate
Supplied with camlocks or hasp & staple locks
Other lock options available at the checkout
Anti-bacterial coating to all steel surfaces
180 degree opening hinge
Two size options: 305w x 390d or 305w x 470d
Optional extras include sloping tops, end panels and aluminium number plates

* Nearest off-loading point determined by driver. Driver not insured to carry up any stairs. Single driver vehicle - assistance will be required for off-loading for larger orders.

Delivery to Home Addresses: Sorry but we are unable to deliver this product to home addresses.

Please Note: The vast majority of our products are manufactured to order and cannot be taken back into stock or exchanged after delivery. Further for further information please contact us.

Code	Height	Width	Depth
LAM/SILV1215/2PO	1780mm	305mm	380mm
LAM/SILV1218/2PO	1780mm	305mm	460mm

Please allow 18mm for the depth of the door

380mm deep + 18mm for the door = 398mm total depth

457mm deep + 18mm for the door = 475 total depth

Individual Compartment Clear Entry Sizes

1780H x 305W x 380D - 1 Compartment = 812H x 241W x 380D

1780H x 305W x 460D - 1 Compartment = 812H x 241W x 460D

The locking options below are availble to buy after adding the product above to your basket.

Probe Type A Standard Camlock

Supplied with 2 keys
Additional keys available or easily replaced
Master Key for supervisor access available

Probe Type B Swivel Hasp & Staple Lock

Chrome swivel hasp & staple/latch lock
For use with own padlock (not included)
Keyless solution

Probe Type P 4 Digit Combination Lock

4 Digit Combination Lock - Type P for use with probe lockers. Use service key and code change button to easily reset.

10,000 combinations
Press and hold change button, rotate wheels to set new code
Scramble after each use
Service key override or code reset to default setting.
Ideal use for schools and staff lockers to eliminate the need for keys
Moulded outercase for easy to turn operation

Probe SGL Type H Coin Keep Lock Machined Door

Probe SGL Type H Coin Return Lock

Probe Type L Digital Combination Lock

40,000 Combinations
Emergency access using service key
Easy to use

The accessories below are availble to buy after adding the product above to your basket.

Probe Master Key

Overrides standard locks
Controlled issue key allowing supervisor access to locked compartments
Lock type to be Lowe and Fletcher or Ronis

Probe Aluminium Effect Round Number Inc. Cut Into Door

Our MDF laminate faced door lockers can have routed number plates fixed onto the door, creating a numbering system, yet still maintaining the upmarket feel of the locker door. The routing is done in the factory ready to accept the number at a later date on site. The number plates are designed for our timber effect and high gloss finish range of lockers.

Probe Interior Hanging Rail 450mm deep lockers only

Interior Hanging rail for Probe lockers - Not retro fit- order at checkout with lockers
Suits 450mm deep lockers only
Suitable for use with own use coat hangers or captive coat hangers

Probe Captive Coathanger for 450mm deep lockers

Hanger for 450mm deep lockers minimum depth
Keeps hangers captive on interior hanging rail
Ensures hangers are available

Probe Engraved Key Fob

Key fobs to attach to locker keys for locker identification.

Probe Integral Sloping Top

Additional sloping top fitted above locker
Stops litter or heavy bags accumulating above the locker
Factory fitted or retro fitted.

Probe Locker stands 150mm

Wrist bands

Adjustable plastic wrist straps
Suitable for all environments including wet areas.
Choice of 7 colours, numbered to choice or plain
Most major keys can be fitted (minor adjustments with Probe locker keys have to be made)

Standard Delivery Leadtime
Estimated delivery is 21-28 working days. Leadtimes quoted are in indication only, and may increase/decrease depending on manufacturing capacity at time of order. Larger orders may take longer than the estimated delivery leadtime.

Standard Delivery Day and Time
The vast majority of deliveries are made anyday Mon-Fri 8.30am to 5.00pm.

Specific Day and Timed Deliveries
On certain products, it may be possible to request a particular day or time for delivery at additional cost. Please contact us for further information and pricing.

Standard Delivery Cost (UK Mainland)
FREE DELIVERY is available on the vast majority of products for orders over £150.00+vat. A £20.00+vat carriage charge will be applied if the order value falls under this amount.

Scottish postcodes including HIghlands and Islands, Truro and Belfast are also exempt from free delivery on certain products. Please check product page for further information and contact us for pricing.

Delivery (Non UK Mainland)
Delivery to extremities and offshore locations is available by arrangement and at an extra cost.

Delivery To Home Addresses: Sorry but we DO NOT deliver to home addresses at this time. If we deem a delivery is to a home address, we will automatically cancel and refund the order within 5 working days.

Delivery Restrictions
Please advise of any delivery restrictions (opening times and vehicle access sizes) prior to order. Failed deliveries will be chargeable.

Please note delivery is to a ground floor entrance or nearest offloading point only which maybe kerbside only. Driver's are not insured to distribute goods around a building or use lifts.

Off loading preparation
For larger orders, assistance will be required in offloading.

See our full delivery and returns policy.

});

Master Key
	Probe Master Key Probe Master Key Master keys for lockers are a handy piece of equipment and should be only issued to supervisors or personnel in charge of lockers. Access can be gained to many locker compartments with one master key which fits a series of different locks. Providing controlled access to locker compartments when either keys are lost or access required urgently.	£15.00 ea
Lock
	Probe Type A Standard Camlock Probe Type A Standard Camlock Camlocks provide added security to metal lockers, cupboards and cabinets. A traditional and cost effective locking method chosen by locker users due to its simplicity and ease of replacement. Users take charge of the responsibility of locking via keys (2 keys supplied with lock) Camlocks are a no cost option when purchasing lockers from 3d Lockers Choose your locking option at checkout or call us for pricing of your locker requirements. Replacement Camlocks Replacement locks and keys available by calling our sales team on 01924 240291	£0.00 ea
	Probe Type B Swivel Hasp & Staple Lock Probe Type B Swivel Hasp & Staple Lock Hasp and staple latch locks are an ideal locking solution which transfers the responsibility for locking to the user. The user is required to secure the locker with a padlock. This system provides flexibility particularly in schools or areas where keys could easily be lost. Hasp and Staple swivel latch locks are available as a no cost option and can be selected just before checkout. Chrome swivel handle with circular cut out to accomodate padlock Locker is opened by turning oval handle 90 degrees to release cam. Ideally a padlock with a 6mm to 7.5mm diameter should be used, with a top shackle dimension of between 19mm and 25mm. Replacement hasp and Staple locks are available by contacting our sales team on 01924 240291	£0.00 ea
	Probe Type P 4 Digit Combination Lock Probe Type P 4 Digit Combination Lock 4 Digit Combination Lock - Type P for use with all probe lockers including metal, timber effect and glossbox. Masterkey will be required to reset lost codes - available at checkout.	£29.02 ea
	Probe SGL Type H Coin Keep Lock Machined Door Probe SGL Type H Coin Keep Lock Machined Door Key remains captive until £1 inserted. Money is collected into a box at rear of locker	£94.49 ea
	Probe SGL Type H Coin Return Lock Probe SGL Type H Coin Return Lock	£32.16 ea
	Probe Type L Digital Combination Lock Probe Type L Digital Combination Lock The digital combination lock is simple to program, has 40,000 combinations and has emergency access using a master reset code. Single user is supplied as standard but a multi user option is available. The batteries last up to 50,000 operations. Manual master override key is available at checkout. This lock can also be used horizontally (subject to minimum order quantity). Auto lock and unlock programming available	£76.53 ea
Hanging Rail
	Probe Interior Hanging Rail 450mm deep lockers only Probe Interior Hanging Rail 450mm deep lockers only When you require hanging space within your locker compartment and require a hanging rail to accomodate a coat hanger, then the probe interior hanging rail can be added as an extra accessory at checkout. Please note this hanging rail is for Probe lockers only. Other type of lockers already have a hanging rail included in the single door and two tier versions. The individual product description will tell you whether it is included or not. If you are unclear, then please contact our sales team on 01924 240291. We'll be happy to advise.	£2.69 ea
Other
	Wrist bands Wrist bands 3D locker adjustable plastic wrist bands providing secure storage for locker keys. Wrist straps available in 7 colours and numbered to choice. Suitable for wet and dry areas. Supplied with free punch to suit most key types. Key Types include: Ronis, Lowe and Fletcher, Assa, Ojmar (Some slight adjustments may be necessary on Probe locker keys) Large easy to read numbers. Includes Punch, block and rivet set. Download available on tab for assembly instructions Price: £3.10 each + VAT if ordered with lockers with additional £10+ VAT P&P if ordered seperately.	£3.00 ea

Easy Payment Options

FREE Standard UK Delivery

Request A Quote

Over 25 Years Trading