Two Person Locker with 2 compartments

The 2 person locker has 2 compartments per person, a small upper compartment for personal items, and a larger lower locker compartment. with full hanging facilities The small and large compartments are keyed alike for use by the same person. The 2 person locker accomodates 2 users within and 1800h x 450 wide framework.

Double coat hook in large compartment for each person
Small upper lockable personal compartment for each person
Accomodates 2 people with small and large compartment each
Horizontal and vertical compartment paird alike, allowing 1 key to operate both paired locks
Hanging space approx 1267mm
Small compartment height approx 200mm
Semi concealed hinges
Grey Frame and choice of door colours
Vented carcass
Biocote antibacterial paint finish
Number plates available at checkout
Pre-drilled for for joining together on site
Choice of lock options at checkout

Delivery to Home Addresses: Sorry but we are unable to deliver this product to home addresses.

Please Note: The vast majority of our products are manufactured to order and cannot be taken back into stock or exchanged after delivery. Further for further information please contact us.

Code	Height	Width	Depth
M15514GUTCL	1800mm	450mm	450mm

The locking options below are availble to buy after adding the product above to your basket.

M Series Ronis Standard Camlock

M Series Hasp & Staple Latch Lock

Hasp & Staple Latch locks for use with padlocks to secure lockers. Oval handle with round cut out to take a 6mm padlock shaft. Fitted as a no cost option when ordering lockers. Replacements available at additioanal cost.

The accessories below are availble to buy after adding the product above to your basket.

M Series Masterkey

Masterkey override for M sereis standard metal lockers.

Ronis camlocks with 95/97 numbers.

M Series Number Plate

Size 35mm long x 18mm high
Fits neatly into M sereis plastic escutcheon plate around lock
Rigid plastic with self adhesive backng

M Series Numbered Key Rings

Numbered key rings to match numbering system on locker doors
Round discs printed with upto 4 digits long
Split pin ring

Standard Delivery Leadtime
Estimated delivery is 18 working days. Leadtimes quoted are in indication only, and may increase/decrease depending on manufacturing capacity at time of order. Larger orders may take longer than the estimated delivery leadtime.

Standard Delivery Day and Time
The vast majority of deliveries are made anyday Mon-Fri 8.30am to 5.00pm.

Specific Day and Timed Deliveries
On certain products, it may be possible to request a particular day or time for delivery at additional cost. Please contact us for further information and pricing.

Standard Delivery Cost (UK Mainland)
FREE DELIVERY is available on the vast majority of products for orders over £150.00+vat. A £20.00+vat carriage charge will be applied if the order value falls under this amount.

Scottish postcodes including HIghlands and Islands, Truro and Belfast are also exempt from free delivery on certain products. Please check product page for further information and contact us for pricing.

Delivery (Non UK Mainland)
Delivery to extremities and offshore locations is available by arrangement and at an extra cost.

Delivery To Home Addresses: Sorry but we DO NOT deliver to home addresses at this time. If we deem a delivery is to a home address, we will automatically cancel and refund the order within 5 working days.

Delivery Restrictions
Please advise of any delivery restrictions (opening times and vehicle access sizes) prior to order. Failed deliveries will be chargeable.

Please note delivery is to a ground floor entrance or nearest offloading point only which maybe kerbside only. Driver's are not insured to distribute goods around a building or use lifts.

Off loading preparation
For larger orders, assistance will be required in offloading.

See our full delivery and returns policy.

The contraction of infection from equipment is a recognised risk in the healthcare sector, office and education establishments and public buildings. It is essential to take precautions to reduce the risk of bacterial cross contamination.

Here at 3D Lockers we can provide an effective solution to minimizing these risks. Our storage lockers have a unique anti-bacterial powder coating incorporated at the time of manufacture. BioCote antimicrobial technology offers constant protection against a wide range of bacteria including MRSA, E. coli, Salmonella, Listeria and Campylobacter.

Field tests have proven that storage equipment treated with BioCote powder coating benefit from a 94% reduction in bacteria on their surface, helping to create a cleaner and more hygienic working environment.

BioCote also helps stop the build up of ugly black mould, keeping their appearance for longer.

BioCote will not wear off or leak – it is long lasting and will retain its antimicrobial efficiency for the lifetime of a product!

Master Key
	M Series Masterkey M Series Masterkey	£15.00 ea
Lock
	M Series Ronis Standard Camlock M Series Ronis Standard Camlock Ronis standard camlocks for use on Link metal lockers come with 2 keys as standard and are fitted using a horseshoe clip fitting. They are a none cost option when ordered with metal lockers and are factory fitted. Replacements also available at additional cost.	£0.00 ea
	M Series Hasp & Staple Latch Lock M Series Hasp & Staple Latch Lock Hasp & Staple Latch locks for use with padlocks to secure lockers (Padlocks not included but can be purchased as an accessory if required). Oval handle with round cut out to take a 6mm padlock shaft. Fitted as a no cost option when ordering lockers. Replacements available.	£0.00 ea

Easy Payment Options

FREE Standard UK Delivery

Request A Quote

Over 25 Years Trading

2 Person Locker with 2 compartments each